AnyTone AT-5289 II 10 Meter Mobile Ham Radio, 50W FM, 20W AM (60W PEP)

AnyTone AT-5289 II 10 Meter Mobile Ham Radio, 50W FM, 20W AM (60W PEP)

$42.00
Prijs met korting  $42.00 Normale prijs 
Ga direct naar de productinformatie
AnyTone AT-5289 II 10 Meter Mobile Ham Radio, 50W FM, 20W AM (60W PEP)

AnyTone AT-5289 II 10 Meter Mobile Ham Radio, 50W FM, 20W AM (60W PEP)

$42.00
Prijs met korting  $42.00 Normale prijs 
10-Meter mobile radio
10 meter radio
NRC mobile radio
10-meter radio
mobile radio 10 meter
  • The maximum power output is 50W in FM and 20W (60W PEP) in AM mode. This ensures long-range communication, but check local regulations for use.

  • It features both RX and TX NRC Noise Reduction, NB (Noise Blanker), and ANL (Automatic Noise Limiter). These are crucial for superior communication clarity.

  • Yes. The radio has a SWR Meter Function for antenna tuning and SWR Protection to guard the final stage against damage from poor antenna matching.

  • Receiver sensitivity is 1.0μV for AM (10dB S+N/N) and 1.0μV for FM (20dB S+N/N). A low μV value is key for picking up distant stations.

  • Yes. It supports VFO (Variable Frequency Oscillator) for direct frequency input and 40 programmable channels across 9 bands (A-I) for standard operation.

Frequency Range 28.000-29.700MHz (Programmable)
Power Output AM: 4W(PEP12W), 20W(PEP60W); FM: 4W,20W, 50W
Sensitivity AM: 1.0uV for 10dB (S+N)/N; FM: 1.0uV for 20 dB (S+N)/N
Modulation FM/AM
Adjacent-Channel Selectivity AM/FM: 60dB
Audio Output Power 3 watts into 8 ohms
Input Voltage 13.8V DC
Drain 15A (with modulation)
Frequency Step 1KHz, 10KHz, 100KHz, 1MHz
IF Frequency AM/FM: 10.695MHz 1st IF, 455KHz 2nd IF
Frequency Tolerance ±5.0 ppm
Squelch Adjustable; threshold less than 1.0uV. Automatic Squelch Control(AM/FM) 1.0uV
Antenna Connector UHF, SO239
Image Rejection More than 65dB
Output Impedance 50ohms
Temperature Range -4℉~+122℉
  • 50W FM & 60W AM PEP: Covers 28.000–29.700 MHz with selectable FM output up to 50W and AM output up to 20W carrier or 60W PEP. Built for licensed 10-meter amateur radio use. AM/FM operation only; SSB is not supported
  • 5-LEVEL TX/RX NRC: Separate transmit and receive noise reduction helps reduce steady vehicle, road, wind, and background noise. ASQ, NB/ANL, RF Gain, and Hi-Cut provide additional control for clearer mobile communication and listening
  • VFO, 99 MEMORIES & PC PROGRAMMING: Tune directly in VFO mode using selectable 1 kHz, 10 kHz, 100 kHz, or 1 MHz steps, save settings to MEM01–MEM99, scan active channels, and manage frequencies and functions with the included PC programming cable and compatible software
  • 7-COLOR LCD & PF MIC KEY: Choose from seven backlight colors and six brightness levels while viewing frequency, channel, signal, voltage, and SWR information. The microphone includes UP/DN controls and a programmable PF key that can be assigned to VOX
  • 13.8V MOBILE POWER & PROTECTION: Uses a standard SO-239 antenna connector and external speaker jack for practical vehicle or base installation. SWR and power-supply voltage protection help protect the radio during operation. Requires a suitable 13.8V DC source capable of supplying up to 15A
  • COMPLETE INSTALLATION PACKAGE: Includes the AT-5289 II radio, hand microphone, PC programming cable, mounting bracket, microphone hanger, installation hardware, protective pads, and 15A fuse. A properly tuned 10-meter antenna and 13.8V DC power source are required separately
  • ADDITIONAL OPERATING TOOLS: Dual Watch, CTCSS/DCS, Busy Channel Lock, TOT, key lock, recording, clock, alarm, Echo, and Roger Beep give licensed operators more ways to customize everyday 10-meter AM/FM mobile operation

Dit vind je misschien ook leuk